Industrial Tapes Manufacturers

Information on industrial jewelry

For industrial use in adhesive, screw sealing, shielding, packaging, wire, electrical wire, ESD control and other industrial applications. Non-reserved and special purpose applications for various specific applications, such as screw sealing, electrical wires, electronic core pieces or equipment approval (TAB), EMI/RFI shielding, electrostatic discharge control, X-ray shielding or X-ray irradiation label, zero point label, Mark or indicator protection, sealing, splicing, bracing, main plate mark/direction, heat tank, heat protection, black electrical accessories, non-slip/anti-slip, sliding/sliding/reducing friction, etc.

When choosing an industrial plant, it is important to understand that there are certain types and sizes of physical characteristics that are required. Body materials, adhesives, molds, and materials are important industrial product structures.

industrial belt type

The four basic categories of products are: non-blind belt, single-sided belt, double-sided belt, and transfer belt.

Do not use non-viscous industrial agents, but it is possible to be self-viscous. For example, PTFE screw-sealed belt, this kind of product is usually called Teflon® belt.

Only one side of the belt has a backing or a body with one side of the adhesive.

Adhesive agent for both sides of the back cover or body. Under certain circumstances, two types of different pressure sensitive adhesives (PSAs) are used on a daily basis. .

The transitional belt is a kind of highly generalized industrial belt, with a very thin mucous membrane composition, without a body or a back.

target

Direction

The width is parallel to the curvature radius of the winding surface of the porcelain.

The thickness is from the side, the thin film or the pressure backing or the adhesive is the distance from the surface to the surface.

physical properties

Peeling strength or sticking force is the required force on the sticky surface.

The strength of the resistance is through the movement of a single block, and the thin film or layered pressure material is used against the force required to break it.

The maximum temperature that the product can withstand is temperature resistant.

The voltage is acceptable under the circumstances where the product does not have a power supply.

material

The viscous agent is a single layer, which is used on the base material for the viscous design.

The body or back is a kind of thin flexible material, the upper surface coating adhesive.

The paper is a kind of paper or thin film material, and it has a unique non-adhesive layer, which is used to cover and protect it, and it is a double-sided adhesive.