Double Sided and Transfer Tapes Manufacturers

Two-sided harmonious transfer information

Two-sided mobile phone with multi-regional application

industries.They usually have one important tool in the fixed plan, so they must have effective and safe sealing compound. Double-sided strap or double-sided strap with adhesive on both sides of the back or body. Or a back cover. Use between double sided belts or transfer belts or within a connection between two surfaces. No basic concrete requirements, connection placement and connection strength requirements, connection, connection or connection.

Usually, it is passed through the adhesive material to be combined with the back cover or body.

Two-sided adhesive with two-sided coating, can be back-to-back contact products.

Transmitter is made from a single-layer adhesive composition, no matter what the back cover, the back or the surface when contacting the surface is an irregular part.

target

attachment type

The active agent is the adhesive layer, the adhesive solidification technology, and the back is different.

Air hardening or thin film drying material passing through evaporation water or organic solvent forming viscosity or "curing".

Solidify under the circumstances of the viscous agent in the air or gas.

Thermoplastic plastic or heat melting can be passed through heating to revert, and then through cooling to harden or solidify.

Heat-setting adhesives are resins that use heat or heat-pressing to solidify commingled polymers. Solidified heat-solid resin will melt and flow during heating, but it is possible to liquefy.

Room temperature solidification or sulfide products are room temperature solidification or sulfide resins or compounds.

Pressure-sensitive adhesives (PSAs) are only required to be highly viscous and maintain their viscosity on most surfaces.

UV or radiation curing adhesive is used UV light, visible light or electron flux (EB) irradiation causes curing, and permanent viscosity is formed under the conditions of no heat or excessive heat.

Reactive/moisture-hardening resin is a single component viscosity agent, its application method is the same as that of heat melting viscosity agent.

A single component viscosity agent or sealant system contains a kind of resin composition, which resin passes through the surface moisture reaction and hardens, the surface coating has an activator bottom lacquer or passes heat.

Two-component or multi-component viscosity agent or sealant system Two types of resin or one type of resin or one type of resin and one type of hardening agent, communicator, activator or activator Aggregates or keys.

Viscous agent properties

Adhesive power is the ability to adhere or adhere to a base material. Therefore, it is necessary to select the appropriate adhesive for application, and other factors. Double-faced tether harmonized transfer tethered physical characteristics and heat characteristics as well as scale and size, such as length, high degree of comfort. Foam-like performance characteristics include peel strength, cohesive strength, stretch or tear strength, and temperature resistance.

mucous material type

Several types of viscous agents are available.

Permanent adhesive that can be formed from sulfonic acid adhesive. It can be made by using two parts of the viscosity agent, which means that it is formed by mixing two kinds of chemical reaction-forming chemical exchange viscosity agents. It can be purchased in a hardened form, exposed to UV rays. With other resin-based composition ratios, it has excellent color resistance and improved setting time. Oxidic acid viscous agent with high inner strength; F.

Heat melting, also known as heat activation, is a process that changes or develops during heating. It is a composite mixture, containing a high proportion of hot water-acetic acid and hot water. High viscosity paste.